RTI T1-B Instrucciones de operaciones descargar pdf (Pagina 19)

It’s Under Control

If you are having problems with your T1-B Universal System Controller, please

read the information below before contacting technical support.

If you continue to have problems, see Chapter 6 for more information on

contacting RTI technical support.

USB COMMUNICATION PROBLEMS

Make sure the battery pack connector is attached properly and the battery

is charged.

Verify that your PC is using Windows XP

or higher. The Integration

Designer™ software requires a USB device driver that may not be installed

on earlier versions of Windows.

Make sure that both ends of the USB cable are connected securely.

Make sure the PC detects the presence of the T1-B. If it doesn’t, unplug

the USB cable, wait for about ten seconds, and plug it in again.

If the download fails after some data has been transferred, try resending

the program.

IR CODE PROBLEMS

If you are using an IR repeater system, make sure it is working correctly

with the original OEM remote. If not, you will need to troubleshoot the IR

repeater system.

If you are still having problems, try adjusting the IR code “Minimum

Repeats” value in the Integration Designer™ programming software.

If the IR code is executed inside a macro that contains multiple IR codes,

try inserting a small time delay before the problem code. If there already is

a delay, try increasing it.

CHAPTER 5 | TROUBLESHOOTING

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

RTI T1-B Instrucciones de operaciones Pagina 19