RTI CP-450 Instrucciones de operaciones descargar pdf (Pagina 14)

CP-450

Cool Power

Audio Amplier

CP-450 REAR PANEL

5. Speaker Outputs

Two sets of removable stereo connectors for speakers in up to two

independent audio zones.

6. Source Inputs

Two (2) sets of left and right RCA jacks from audio sources.

7. AC Power Socket and Fuse

Three-pin grounded socket to connect removable AC power cord with a

T2AL 250V fuse.

8. RS-232

DB-9 jack for RS-232 control of the CP-450 from a control system. See

Chapter 3 Installation & Operation for RS-232 control details.

9. IR In/Out

The 3.5mm mini IR In jack allows the CP-450 to be controlled by IR.

The 3.5mm mini IR Out jack allows for buffered IR output of the IR In

for controlling additional CP-450 units in a cascaded conguration.

10. 12V DC Out & 3-30V AC/DC In

The CP-450 can be turned on automatically by an outside trigger when

the remote power switch is set to “Trigger.” The voltage used to turn

on the CP-450 is applied to the “3-30V DC/AC In” socket, and

can come from an RTI system controller or another CP-450 (if used in

a cascaded conguration). The “12V DC Out” socket provides a +12VDC

that can be looped to the “3-30V DC/AC In” socket to trigger another

CP-450 in a cascaded conguration.

11. 115/230 AC Voltage Switch

Switch used for toggling between 115 Volts and 230 Volts for certain

international locations. The red voltage switch should be left in the 115

Volt position if used within the United States.

CHAPTER 2 | FEATURES AND DESCRIPTION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sin comentarios

RTI CP-450 Instrucciones de operaciones Pagina 14